| PHE
Series Features |
- Integrated Solid State State System
- Controlled, Automatic Charger ~ No manual battery recycling
- Lock Out (automatic battery connect)
- Low Voltage Battery Cutoff
- Dual Voltage Transformer for 120/277 VAC Operation
- Maximum Input Rating
12 VAC 60 Hz 0.33 Amps
277 VAC 60Hz 0.14 Amps
- UL Listed for use in NEC Class I, Div. II, Groups A, B, C,
& D Environments
|
Designed for use in hazardous and potentially
hazardous environments, the PHE Series offers completely self-contained unit operation
with extended lamp run times. |
| |
- Sealed Lead Calcium Battery
- 6 or 12 Volt Operation
- Maintenance Free
|
- Par-36 Sealed Beam Lamps
- STD Lamp: 6 Volt ~ 12 Watt
12 Volt ~12 Watt
|
| |
- Polycarbonate Lamp Lens (Food Safe Areas)
- Clear Meter Viewport
- Sealed, Front Mounted Test Switch
- Power On Indicator
- UL 924 & 1604 Listed
|
- High Impact Fiberglass Housing
- Stainless Steel Hardware
- Single Piece Molded Lamp Head with Non-Removable Gasket
|
| |
| Height: |
17.2" |
PHE6S20 |
| Width: |
13.2" |
PHE12S20 |
| Depth: |
6.6" |
|
| Height: |
19.2" |
PHE6S40 |
| Width: |
15.2" |
PHE6S50 |
| Depth: |
7.1" |
|
| |
Unit Information (Watts per
hour)
Model # |
STD LAMP WATT |
1.5 |
2 |
3 |
Replacement Battery |
| H2PHE6S20
|
12 |
50 |
38 |
25 |
(2) S610 |
| H2PHE6S40
|
12 |
100 |
75 |
50 |
(4) S610 |
| H2PHE6S50
|
12 |
125 |
94 |
63 |
(1) S650 |
| H2PHE12S20
|
12 |
50 |
38 |
25 |
(2) S610 |
Meets
general requirements for class I, div.II
Illumination is rated to 87.5% of
nominal system voltage
and recharge to full capacity within 24 hours.
NEC requires 1.5 hours of emergency illumination.
- Created by Bridgette O'Connor 2000 - |
